Order by 1PM for next day delivery
on standard off the shelf products
Major Suppliers of DPC Products Online

Extension Sleeves Vertical and Horizontal

Available in 3 variations
  • Black polypropylene.
  • Lengths 300mm and 450mm.
  • Special lengths to order.
  • Packed in boxes containing 10no.
  • Smaller quantities available.
£4.80 + VAT
£4.80 + VAT
£7.37 + VAT

Gallery

Use

To extend Type TAV cranked sleeve to create a greater distance between inlet and outlet level.

Introduction

Where airflow is required for a specific area at lower level via a cavity wall,a cranked sleeve is employed with a cavibrick.

The (cranked)Type TAV Telescopic Adjustable Ventilator is used for such purposes and provides a five brick courses maximum difference between inlet and outlet levels.

Where a greater vertical difference is necessary, an extension sleeve is available. Vertical sleeves are available in two standard lengths,with special lengths available to order. Sleeves can also be supplied to extend the Type TAV horizontally.
Specify clearly if required so correctly dimensioned section is supplied.See next entry if you wish to connect pipe to Type TAV.

Data

  • Black polypropylene.
  • Lengths 300mm and 450mm.
  • Special lengths to order.
  • Packed in boxes containing 10no.
  • Smaller quantities available.

Horizontal extension sleeves

In instances where it is desirable to horizontally extend the lower TAV aperture inwardly (to accommodate an unusual inner skin dimension or feature), an appropriate horizontal 600mm long extension sleeve is available.
For distances exceeding 600mm horizontally,we recommend use of a Type TAV to Round Connector that permits use of nominal 100mm plastic pipe.

Cavibrick Sleeves (1 brick sleeve) Cavibrick Sleeves (1 brick sleeve)
£3.39 + VAT
(1 brick sleeve 75mm x 225mm)  Sleeve attachments to provide ventilation to specific areas. introduction A range of straight sleeves to accommodate...
Contract Slate Ventilator Contract Slate Ventilator
£10.84 + VAT
To provide a ventilation route via a slated roof,but with an alternative appearance. Introduction The Contract Slate Ventilator can be readily...
Roof Ventilator for tiled roofs Roof Ventilator for tiled roofs
£30.24 + VAT
Sloping roof ventilator for use at high or low level. Introduction The universal tile ventilator is designed for use with tiled roofs. Compatible...
Type ECF Type ECF
£0.52 + VAT
To provide ventilating infill whilst preventing entry of birds under contoured roof finishes. Introduction The eaves comb filler is manufactured...