|
|
You are in: Home  Ventilation
|
|
Ventilation |
Welcome to the range of building ventilation products by leading manufacturers.
We have products to satisfy the ventilation requirements demanded in the construction of roofs, walls and floors. Products appropriate for new and existing structures are available.
Ventilation to negate the effects of condensation in roofs, walls and floors is necessary to comply with the requirements of the Building Regulations and British Standards. Please scroll down the products to appreciate the range avaiable. Data is included to help provide guidance in your selection.
|
VENTILATION PRODUCTS
Displaying 1 to 10 of 44 products.
|
|
 |
use
The cavibrick is a high performance ventilator which may be used instead of a conventional air-brick.
introduction
Manufactured to brick dimensions, the cavibrick promotes a high air throughput, via a front louvred grille. The louvres are... |
| from £0.60 |
| |
|
 |
use
Permits cavibrick to be connected to standard pipe.
introduction
Where it is proposed to provide ventilation to a remote room, under floor area or void, a rectangular to round converter sleeve is available to permit the use of standard 10... |
| from £3.50 |
| |
|
 |
use
(1 brick sleeve 75mm x 225mm) Sleeve attachments to provide ventilation to specific areas.
introduction
A range of straight sleeves to accommodate one, two or three cavibricks. (High throughput cavibricks are designed to be used singul... |
| from £2.88 |
| |
|
 |
use
(2 brick sleeve 50mm x 225mm) Sleeve attachments to provide ventilation to specific areas.
introduction
A range of straight sleeves to accommodate one, two or three cavibricks. (High throughput cavibricks are designed to be used sing... |
| from £4.04 |
| |
|
 |
use
(3 brick sleeve 225mm x 225mm) Sleeve attachments to provide ventilation to specific areas.
introduction
A range of straight sleeves to accommodate one, two or three cavibricks. (High throughput cavibricks are designed to be used sin... |
| from £4.62 |
| |
|
 |
use
To provide a ventilation route via a
slated roof,but with an alternative
appearance.
introduction
The Contract Slate Ventilator can
be readily cut to suit both natural
and man-made slates.This single
model may be used with eithe... |
| from £8.65 |
| |
|
 |
use
The purpose and function of the
perp weep/ventilator is described
on entry for Type W Caviweep vent.
An alternative product is now
available offering smaller overall
dimensions but with high
performance categorisation.
introduct... |
| from £0.25 |
| |
|
 |
use
To extend Type TAV cranked
sleeve to create a greater distance
between inlet and outlet level.
introduction
Where airflow is required for a
specific area at lower level via a
cavity wall,a cranked sleeve is
employed with a cavib... |
| from £4.14 |
| |
|
 |
use
To provide ventilation route via slated roof finish.
introduction
The Flush Slate Ventilator promotes an airflow rating of 10,000mm2 and has the ventilation apertures moulded within its surface. It is used in place of a slate to provide a... |
| from £12.56 |
| |
|
 |
use
One-Way (Heavy Duty)is an
aspirating roofing underlay for non-
ventilated pitched roof systems.One-
Way may be used in non-ventilated
cold roof and most warm roof
applications when comprising one
part of a pitched roof system.
i... |
| from £91.00 |
| |
|
|
|
